Gender

Colour

Certification

Collections

Function

High vis co-certification

High vis classification

Lining

Material

Sustainability Label

Type of garment

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Polyuretan coated (PU) polyester, wind- and waterproof fabric

PVC and Polyuretan (PU) coated polyester, durable fabric,  wind- and waterproof fabric with breathable function.

Wind- and waterproof fabric with breathable function.

Lightweight, water-repellent and durable fabric that protects you from dirt.

Sanforized (pre-shrunk) tightly woven cotton. Soft, comfortable but hard wearing cloth. 

Rugged, all-round polyester/cotton cloth. Soft, hard wearing and flexible. Very good shape retention and excellent comfort. All Blåkläder's functional tradesmen's garments are available in this cloth.

Flame retardant fabric, heavy but still flexible fabric for hard environments. Certified for welding class 2. The fabric is certified EN 1149-3, EN IEC 61482-1-1, EN 61482-1-2, EN ISO 11611, EN ISO 11612. 

Quality 1519 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Bib and brace trousers made from a soft, flexible, and durable material, featuring a thin lining on the front. In the lined areas, the trousers are approved for the higher arc protection class—APC 2. 
Includes a bellows leg pocket with flap, internal ID card holder and mobile phone holder on the left side. Two back pockets with flaps equipped with press studs. This metal-free model uses plastic press studs and zips. 
Certified according to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 APC 1 (APC 2 in the lined areas), and EN 13034.

APC 2 Inherent Bib trousers

Bib and brace trousers made from inherently flame-resistant material, meaning the flame protection is built into the fibre’s structure. In the lined areas, the trousers are approved for the higher arc protection class—APC 2. The trousers are soft and flexible, with external kneepad pockets reinforced with CORDURA®/Kevlar®/Protal® material. 
These dirt-, and water-repellent trousers feature smart pocket solutions and elastic braces for enhanced comfort. Made from ripstop material with excellent tear strength. 
For increased durability, exposed pockets are reinforced with double layers. Tested and approved for 50 washes. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, and EN 61482-2 APC 1 (APC 2 in the lined areas).

APC 2 Multinorm Inherent Bib trouser

Rain trousers in high visibility for you with work assignments that require a durable but at the same time movable rainwear. The trousers are wind and waterproof with welded seams. Good fit with wide elastic on back, adjustable and removable braces with elastic and adjustable leg ends with buttons. 
Easy-access pockets such as leg pocket with bellows and flap, ruler pocket with extra pocket and knife holder and opening with flap to enable hanging out the tool pockets. The trousers are reinforced on knees and lower back of trouser leg. 
Certified according to EN 343, Protective clothing against bad weather and EN ISO 20471, Class 2, Protective clothing with high visibility. Color 4600, 9900 is not certified according to EN ISO 20471. Colors 3300, 4600, 5300 and 9900 have been updated. Older model is delivered as long as the stock is sufficient. For updated model in color 4600, 9900, see Article 1305.

Rain trousers Hi-Vis LEVEL 2

BIB trouser in high visibility for you with work assignments that require extreme wear resistance of a rainwear. The trousers are wind and waterproof with welded seams. Good fit with adjustable waist with buttons, adjustable braces with elastic and adjustable leg ends with buttons. 
Certified according to EN 343, Protective clothing against bad weather and EN 471 / EN ISO 20471, Class 2, Protective clothing with high visibility.

Bib trousers Hi-Vis Level 3

Wind- and waterproof shell trousers in a breathable material with taped seams to keep you dry in the rain. The trousers feature a high-waisted back, side zipper up to the knee and integrated snow gaiter with opening. 
Other great features include removable elasticated braces, discreet reflective details on the rear pockets and side of the legs. Ideal to wear with jackets 4881 and 4988. 
Certified according to EN 343, protective clothing to withstand bad weather.
Loose tool pockets art. no. 2183, sold separately.

Shell Trousers

Keep warm when the cold bites. Lined trousers in a wind and waterproof material. The trousers are equipped with extended waistband back and zippers on the sides reaching up to the knee, as well as an openable internal snow gaiter. 
Other good features are the detachable, elastic braces and the discreet reflective details on the side of the leg. 
Certified according to EN 342, protective clothing for protection against the cold together with the jackets listed under the "Certifications" tab, and EN 343 – protective clothing against bad weather. Tool pockets sold separately.

Winter trousers

Warm-lined, wind and waterproof winter trousers, Class 2 hi-vis, with taped seams in a tough, durable material. Offers the best possible visibility when you need it most. Exterior knee pad pockets. 
The trousers have openable snow locks at the ankles and detachable braces. You can attach the detachable tool pockets 2170, sold separately. 
To reach different leg lengths, we offer these trousers in 3 lengths. Ex. Size Large: LS=short -4, L=XXcm, LT=Long +4.

Hi-Vis Winter Trousers

Shell Class 1 hi-vis trousers with taped seams to protect against the wind and wet. Adjustable, detachable braces, elasticised waist, exterior knee pad pockets, velcro hammer strap and snow lock. 
Detachable tool pockets 2170 can be added, sold separately. To reach different leg lengths, we offer these trousers in 3 lengths. Ex. Size Large: LS=short -4, L=XXcm, LT=Long +4.

Hi-Vis Shell Trousers

Warm lined Hi-Vis winter trousers with taped seams in a durable and strong material. The trousers are wind- and waterproof and have several functional pocket solutions. 
All in all, a great pair of winter trousers that is hard to wear out.

Saw protection trousers in class 2 Hi-vis, which have full-coverage class 1 saw protection at the front, adapted for right- and left-handed people. 
The back consists of a 4-way stretch that makes the trousers light and comfortable to wear. The trousers also have a raised back for increased comfort.

Chainsaw trousers Hi-Vis

Two loose-hanging chest pockets with press studs and safety straps, one with a flap and one with pen pocket. Two tool pockets that can be placed in the bellows front pockets. Leg pocket with bellows, flap, pen pocket, extra pocket, phone pocket and ID card pocket. 
CORDURA® reinforced knees. Hammer holder, strong metal zip and two back pockets with bellows, also CORDURA® reinforced. Broad, extra strong braces with quick lock. D ring for attaching ID card holder.

Bib Overalls

Bib overalls suitable for welding and similar jobs. The trousers can be adjusted at the waist with buttons and have a chest pocket, external knee pad pockets, left leg pocket, right folding rule pocket, and reflective details on the back, lower leg and rear belt loop. Tested for industrial laundry.
Certified to EN 1149-5, EN ISO 11612, EN ISO 11611, IEC 61482-2, EN 14404.

Welding Bib trousers

Hi-vis bib overalls with CORDURA® reinforced knees and back pockets for extra durability. Knee protector pockets, placement at two levels. 
The trousers have wide, strong elastic braces, as well as smart pocket solutions and functions such as a hammer holder, folding rule pocket with knife and pen pocket, and a D ring. Back pockets with bellows, and tool pockets that fit inside the bellowed front pockets.

Hi-Vis Bib Overalls

Flame retardant bib overalls in 1519 quality, an inherent Class E3 fabric specially designed for work in metal industries that deal with molten iron. The Class 1 hi-vis certified bib overalls are designed to protect against splashing from molten metal, and radiant heat.
These oil, dirt and water-repellent trousers with elastic braces have a chest pocket, a left leg pocket with flap, ID card holder, phone pocket, folding rule pocket, knife holder, and back pockets with flaps and press studs. Tested for industrial laundry.
Certified to EN ISO 20471, EN 1149-5, EN13034, EN ISO 11612, EN ISO 11611, IEC 61482-2, EN 14404, ATPV: 14 cal/cm², ELIM: 12 cal/cm².

APC 2 Inherent Bib trousers

APC 2 Multinorm Inherent Bib trouser

Rain trousers Hi-Vis LEVEL 2

Bib trousers Hi-Vis Level 3

Shell Trousers

Winter trousers

Hi-Vis Winter Trousers

Hi-Vis Shell Trousers

Hi-Vis Winter Trousers

Chainsaw trousers Hi-Vis

Bib Overalls

Bib Overalls

Welding Bib trousers

Hi-Vis Bib Overalls

Inherent Steel Bib trousers