Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Collections

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

NEW COLOUR!

Comfortable and stretchy rib quality, with inherent flame resistant properties. Fabric is certified for EN 11612 A1, B1, C1, EN 1149-3, EN IEC 61482-1-1 Ebt: 8,2 cal/cm² ELIM: 7,3 cal/cm², EN IEC 61482-1-2, APC 1.

A comfortable sweatshirt fabric in modacrylic- and cotton mix with best protection. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Comfortable and flexible single jersey with inherent flame resistant properties. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

A knitted material with inherent flame resistant features. It's an interlock that is soft and comfortable to wear. The fabric is certified for EN ISO 20471, EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Blåkläder original insole, validated for use with safety shoe collections Retro, Elite, Gecko and Cradle. It is anatomically designed in soft PU material for the best comfort. Textile upper with perforations and good moisture absorption. 
Developed in collaboration with Camp Pro. ESD approved.

Original Insole RETRO & ELITE

A durable boot with a membrane that keeps you dry in wet environments. This boot is made of a smooth, high-quality, full-grain leather for your best comfort. With a textile nail penetration protection, aluminum toe cap and TPU reinforced toe and heel part, the boot is made for tough conditions. The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. Best suited for outdoor work in construction, transport, maintenance, repair, and operation. Women´s last in UK sizes 2-6.

Elite Safety Boot

A high-performance safety boot with very high durability and Freelock function from Blåkläder´s Elite collection. This shoe is made of a durable and smooth microfibre and protects the foot in the best way with an aluminum toe cap, soft nail penetration protection, and TPU reinforced toe and heel part. Reflective details on the side as well as the heel make you and your shoes visible when needed. 
The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. 
The shoes are well suited for craftsmen within construction, plumbers, electricians, and maintenance. Women’s last in sizes 35-39.

ELITE Safety Boot

Complete repair kit for changing the freelock system on Blåkläders high-cut safety boots.

Repairkit Freelock for High-cut Boot

A high-performance safety shoe with very high durability and Freelock function from Blåkläder´s Elite collection. This shoe is made of a durable and smooth microfibre and protects the foot in the best way with an aluminum toe cap, soft nail penetration protection, and TPU reinforced toe and heel part. Reflective details on the side as well as the heel make you and your shoes visible when needed. 
The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. 
The shoes are well suited for craftsmen within construction, plumbers, electricians, and maintenance. Women’s last in sizes 35-39.

ELITE Safety Shoe

Open sandal with good protective capacity from Blåkläder's Elite collection. The insole is made of anatomically soft PU leather with good moisture absorption, which in combination with the sandal design makes it extra suitable for indoor and outdoor work during the summer. 
The sandal opens and closes with velcro straps, has a toe cap in aluminum and a soft penetration resistant midsole that makes it extra movable. 
The protective sandal is best suited for work on construction, transport, maintenance, repair, and operation. Women’s last in sizes 35-39.

ELITE Safety Sandal

Protective boot in leather from Blåkläder's Elite collection that keeps what it promises. This ankle-high boot of the highest class guarantees very high durability and above all the necessary protection. 
The ankle section in soft padding provides great stability while the toe cap in aluminum, the soft penetration resistant midsole and the extra TPU-protected toe and heel parts guarantee safety. 
The insole has anatomical support, made of soft PU material covered with textile with good moisture absorption. Reflective areas are on the heel and side. 
Best suited for outdoor work in construction, transport, maintenance, repair, and operation. Women’s last in sizes 35-39.

ELITE Safety boot

High-performance safety shoe with very high durability from Blåkläder's Elite collection. This shoe is made in extremely durable natural leather protects the foot in the best way through an aluminum toe cap, a soft penetration resistant midsole and extra TPU protection on the toe and heel part. Reflective details on the side as well as the heel make you and your shoes visible when needed. 
The insole has anatomical support, made of soft PU material covered with textile with good moisture absorption, which in combination with the shoe's good breathability gives it an unbeatable overall impression. 
Best suited for outdoor work in construction, transport, maintenance, repair, and operation. Women’s last in sizes 35-39.

A durable shoe with a membrane that keeps you dry in wet environments. This shoe is made of a smooth, high-quality, full-grain leather for your best comfort. With a textile nail penetration protection, aluminum toe cap and TPU reinforced toe and heel part, the shoe is made for tough conditions. 
The insole, with anatomical support, is made of a smooth PU material, covered with a textile surface with good moisture absorption. The membrane will keep you dry throughout the day and the Freelock makes it easy to jump in and out of the shoes. 
The shoe is well suited for craftsmen within construction, plumbers, electricians, and maintenance. Women’s last in sizes 35-39.

A durable boot with a membrane that keeps you dry in wet environments. This boot is made of a smooth, high-quality, full-grain leather for your best comfort. With a textile nail penetration protection, aluminum toe cap and TPU reinforced toe and heel part, the boot is made for tough conditions. 
The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. The membrane will keep you dry throughout the day and the Freelock makes it easy to jump in and out of the shoes. 
Best suited for outdoor work in construction, transport, maintenance, repair, and operation. Women’s last in sizes 35-39.

A high winter boot with a lining of wool/polyester, leather of the best quality, and membrane so you keep your feet warm and dry during cold winter days. With textile nail protection, aluminum toe cap and TPU-reinforced toe and heel cover, this shoe handles tough environments in a good way. 
Nitrile rubber outsole for maximum durability. The insole, which is anatomically designed for the best comfort, is made of a soft PU material and covered by warm lining. 
Best suited for outdoor work in construction, transport, maintenance, repair, and operation. Women’s last in sizes 35-39.

ELITE Winter Boot

A high winter boot in high-quality leather and with a membrane so that you keep your feet warm and dry during cold winter days. With textile nail penetration, aluminium toe cap and TPU-reinforced toe and heel cover, this shoe handle challenging environments in a good way. Nitrile rubber outsole for maximum durability. The insole, which is anatomically designed for the best comfort, is made of a soft PU material. Best suited for outdoor work in construction and transport, maintenance, repair and operation.

ELITE winter boot

Complete repair kit for changing the Freelock system on Blåkläders safety boots.

Repairkit Freelock for Mid-cut Boot

Complete repair kit for changing the Freelock system on Blåkläders safety shoes.

Repairkit Freelock for Low-cut Shoe

Blåkläder original shoelaces, for use in Blåkläder safety shoes and safety boots. 
Length 100-160 cm, 39-63". 
Recommended lengths for low cut shoes 
<ul>
<li>Size 35-39: 100 cm, 39". </li>
<li>Size 40-44: 105 cm, 41". </li>
<li>Size 45-48: 115 cm, 45". </li>
</ul>
Recommended lengths for mid cut boots 
<ul>
<li>Size 35-39: 140 cm, 55". </li>
<li>Size 40-44: 150 cm, 59". </li>
<li>Size 45-48: 160 cm, 63".</li>
</ul>

Original Shoelaces

Blåkläder original shoelaces, for use in Blåkläder winter boots. Length 160-180 cm, 63-71". 
Recommended lengths for high cut boots 
<ul>
<li>Size 35-39: 160 cm, 63".</li>
<li>Size 40-44: 170 cm, 67".</li>
<li>Size 45-48: 180 cm, 71".</li>
</ul>

Undershirt with a high collar which, thanks to its comfortable, flame-resistant material, provides permanent protection against e.g. heat, flame and electric arc. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Multinorm basic zip neck

Warm, stylish and knitted beanie with a fabric label.

Beanie Limited Edition

Limited Edition T-shirt with 'Life is too short for poor quality'-print. A comfortable T-shirt in 100% cotton. The T-shirt has a ribbed hem and reinforced neck and shoulder seams.

T-shirt Limited Edition

Stylish, comfortable and very useful flame-resistant hoodie with inherent quality with side panels for enhanced ergonomic fit. Featuring a protective hood with an ingenious solution in the front that allows you to turn up the collar for increased protection when needed. 
The hoodie features embroidery clearly showing its flame-resistant credentials. Concealed inner phone pocket. 
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Flame resistant Hoodie

Undershirt which, thanks to its comfortable, flame-resistant material, provides permanent protection against e.g. heat, flame and electric arc. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Flame resistant underwear top

Our flame-resistant long johns in comfortable, flame-resistant material, providing permanent protection against e.g. heat, flame and electric arc. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Multinorm Long Johns

Long-sleeved flame-resistant T-shirt in a thin quality that's really comfortable. Women's fit, rounded neck, reinforced seams in the shoulders and back of neck, and ribbed cuffs. Approved for washing at 60°C. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Women’' Flame-Resistant T-Shirt Long Sleeves

Limited Edition T-shirt with 'Life is too short for poor quality ' print. A comfortable T-shirt with a women's fit in 100% cotton. The T-shirt has a ribbed hem and reinforced neck and shoulder seams.

T-shirt Limited Edition Women

Versatile and safety-certified hi-vis sweatshirt. This flame-resistant, non-metal sweatshirt in a women’s fit is classified as class 1 and has a number of a functional features. One of its benefits is its utility as both a sweatshirt and a jacket. 
The sweatshirt is equipped with segmented reflective transfers that improve visibility and safety. What’s more, it has a practical covered zipper at the front and side panels that give it an ergonomic fit. 
Manufactured in an attractive, high-quality material and offers excellent protection. The sweatshirt has two front pockets with zippers for practical storage and a high collar that provides additional protection when turned up. 
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471, Class 1. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Women’s Multinorm Hi-Vis Sweatshirt Zip

Long-sleeved hi-vis T-shirt with flame resistance and diagonal reflective tape stripes. Women's fit, rounded neck, reinforced seams in the shoulders and back of neck. 
Certified to EN ISO 20471, EN 1149-5, EN ISO 11612.

Women's Long-sleeved T-shirt Multinorm

Flame-resistant, non-metal hi-vis (class 2) sweatshirt which has the added benefit of functioning as a jacket. Featuring segmented reflective transfers, covered zipper at the front and side panels for increased ergonomic fit. 
The sweatshirt has a nice quality with good protective values, two front pockets with zippers and a high collar that provides good protection when turned up. 
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471, Class 2. EBT: 13 cal/cm², ELIM: 12 cal/cm².

Flame-resistant, non-metal hi-vis (class 1) sweatshirt which has the added benefit of functioning as a jacket. Featuring segmented reflective transfers, covered zipper at the front and side panels for increased ergonomic fit. 
The sweatshirt has a nice quality with good protective values, two front pockets with zippers and a high collar that provides good protection when turned up. This is a sought-after product that is now available in Blåkläder’s range. 
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471, Class 1. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Multinorm sweatshirt with zip

This sought-after flame-resistant and non-metal hi-vis sweatshirt is classified as class 2 in sizes XS–M and class 3 in size L and larger. One of the many advantages of this sweatshirt is that it can also be used as a jacket if needed. 
The sweatshirt is equipped with segmented reflective transfers for increased visibility and safety. What’s more, it has a covered zipper at the front and side panels that give it an ergonomic fit. The sweatshirt has a comfortable quality with excellent protective properties. 
In addition to protection, the sweatshirt is also practical as it’s equipped with two front pockets with zippers and a high collar that provides additional protection when turned up. 
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Multinorm Sweatshirt with full Zip

Vest in a soft, supple material offering high durability. A popular model among installers and electricians who are used to carrying a lot of equipment. Several multifunctional pockets that help make day-to-day tasks easier. 
The vest is metal free and has plastic press studs and zip. Heat-applied reflective details for enhanced visibility and loops around the waist designed for a belt that can relieve weight.

Inherent Vest

An oil-, dirt- and water-repellent overshirt with enhanced visibility in a soft, supple quality, characterized by high comfort and durability. This women's fit garment is a functional cross between traditional industrial jacket and modern shirt. 
It is completely metal free, and has plastic press studs and a plastic two-way zip. Covered, bellowed chest pockets with plenty of room for a mobile phone, note pad and other equipment. An exterior holder for e.g. a pen or glasses on the left side. 
Holders for an oximeter, microphone or other technical device above each chest pocket. The collar has press studs on the front for extra protection when needed. Pre-bent sleeves and cuffs adjustable in two different widths with press studs. 
Back hem extended for extra comfort. Heat-applied reflective details on shoulders, back and lower sleeves. Tested and approved for industrial washing - EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2.

Women's Inherent Overshirt

An oil-, dirt- and water-repellent overshirt with enhanced visibility in a soft, supple quality, characterized by high comfort and durability. This garment is a functional cross between traditional industrial jacket and modern shirt. 
It is completely metal free, and has plastic press studs and a plastic two-way zip. Covered, bellowed chest pockets with plenty of room for a mobile phone, note pad and other equipment. An exterior loop for e.g. a pen or glasses on the left side. 
Holders for an oximeter, microphone or other technical device above each chest pocket. Collar raised at the back, with press studs in the front. Pre-bent sleeves and adjustable cuffs with press studs. Back hem extended for extra comfort. Heat-applied reflective details on shoulders, back and lower sleeves. 
Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. Certified to EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2.

Inherent Overshirt

Jacket made from a soft, supple, durable material, with a thin inside lining. This combination means the jacket is approved for APC 2, the higher class for arc flash protection. 
Hidden chest pocket with zip, two front pockets with flaps, and loops at the yoke for a microphone, oximeter or other technical device. Heat-applied reflective details for enhanced visibility. The jacket is metal free and has plastic press studs and zips. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 (APC 2), EN 13034.

APC 2 Inherent Jacket

Women's fit craftsman trousers for use in areas that require good protection, along with flexible trousers offering high comfort and plenty of solutions for carrying equipment. These are metal-free trousers with plastic press studs and zip. 
The waistband has a raised back section with elastic in the sides for enhanced comfort, and two fixed holster pockets with plenty of solutions for storing tools and small technical equipment and components. The holster pockets are reinforced with double fabric at the bottom. Bellowed leg pockets, the left with an ID card holder. 
The trousers have two bellowed back pockets with press studs. Pre-bent knees with external knee pockets that open from below. Ankles adjustable with press studs to three different widths. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Women's Craftsman Inherent Trousers

A metal-free industrial jacket in a soft, supple, comfortable quality. Highly durable and oil-, dirt- and water-repellent. Hidden chest pocket with zip, two front pockets with flaps, and loops at the yoke for a microphone, oximeter or other technical device. 
Extended, adjustable back, and the cuff width is also adjustable using press studs. High collar for greater protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Inherent Jacket

Metal-free craftsman trousers for use in areas that require flexibility and good protection. The trousers offer high comfort and sewn-on holster pockets. Raised rear waist section with elastic in the sides for enhanced comfort. Bellowed leg pockets, the left with an ID card holder, and two back pockets with press studs. 
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Craftsman Inherent Trousers

A women's fit industrial jacket in a soft, supple, comfortable, highly durable quality. The metal-free (buttons and covered zips in plastic) jacket has oil-, dirt- and water-repellent properties. Hidden chest pocket with zip, two front pockets with flaps and press studs, and loops for a microphone, oximeter or other technical device. 
Extended, width-adjustable back, and the cuff width is also adjustable using press studs. The collar can be closed with two press studs for extra protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Women's Inherent Jacket

Jacket made from a soft, supple, durable material, with a thin inside lining. This combination means the jacket is approved for APC 2, the higher class for arc flash protection. Smart pocket solutions such as double chest pockets with covered zips. 
This is a metal-free garment with plastic components. 
Certified to EN ISO 20471, EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 (APC 2), EN 13034.

APC 2 Multinorm Inherent Jacket

Soft, supple, comfortable women's fit trousers optimized for environments that require strong protection combined with high user comfort. The trousers are made from an oil-, dirt- and water-repellent material. This garment is metal free, and has plastic buttons and zip. 
Raised back section with elastic in the side waist for enhanced comfort. Bellowed leg pocket with flap, internal ID card holder. The trousers have two back pockets with press-studded flaps. Pre-bent knees with external knee pockets that open from below. Ankles adjustable with press studs to three different widths. 
Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing - EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Women's Inherent Trousers

Soft, supple, comfortable trousers optimized for environments that require strong protection combined with high user comfort. The trousers are made from an oil-, dirt- and water-repellent material. 
This garment is metal free, and has plastic buttons and zip. Raised back section with elastic in the side waist for enhanced comfort. Bellowed leg pockets with flaps, internal ID card holder. The trousers have two back pockets with press-studded flaps. 
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Trousers

Trousers made from a soft, supple, durable material, with a thin lining inside the front. In the lined areas, the trousers are approved to the higher arc flash protection class, APC 2. One bellowed leg pocket with flap, interior ID card holder and phone holder on the left side, a bellowed ruler pocket with flap on the right. 
The trousers have two back pockets with press-studded flaps. This is a metal-free garment with plastic press studs and zip. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 APC 1 (APC 2 where lined), EN 13034.

APC 2 Inherent Trousers

Bib trousers in a soft, comfortable quality offering high durability. The trousers have oil-, dirt- and water-repellent properties. Metal free with plastic buttons, zip and buckles.
Adjustable braces with elastic in the back, a button-adjustable waist, belt loops, pre-bent knees and external knee pockets that open from below, as well as ankle width that adjusts with buttons.
Functional pockets including a chest pocket, two front pockets, two back pockets with flaps, and leg pockets with an ID card holder on the left.
Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Bib Trousers

Overalls in a soft, comfortable material offering high durability and oil-, dirt- and water-repellent properties. Metal free with plastic buttons and two-way zip. 
A waist that adjusts from inside, several multifunctional pockets, and heat-applied reflective details in carefully selected places. External knee pockets that open externally. Both the cuffs and ankles can be adjusted using press studs. 
Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Overall

Trousers made from a soft, supple, durable material, with a thin lining inside the front. In the lined areas, the trousers are approved to the higher arc flash protection class, APC 2. 
Many smart pocket solutions that comply with the certification requirements. This is a metal-free garment with plastic press studs and zip. 
Certified to EN ISO 20471, EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 APC 1 (APC 2 where lined), EN 13034.

Showing results for: "elite"

24620000

Original Insole RETRO & ELITE

24390000

Elite Safety Boot

24530000

ELITE Safety Boot

B1030000

Repairkit Freelock for High-cut Boot

24510000

ELITE Safety Shoe

24490000

ELITE Safety Sandal

24520000

ELITE Safety boot

24500000

ELITE Safety Shoe

24540000

ELITE Safety Shoe

24550000

ELITE Safety Boot